Case SR270 - General Specification - Hydraulic Oil for All Models

INTRODUCTION
Generalspecication-Hydraulicoilforallmodels
RAPH12SSL0110FA1
BlockViscosityTemperaturerange
(1)CASEAKCELAHYDRAULIC
EXCAVATORFLUID
-35–38°C(-31–100°F)
(2)TUTELAAUTOSUPREME™ENGINEOIL
SAE10W-30
-15–46°C(5–115°F)
(3)CASEAKCELAUNITEKNO.1™
SSLCJ-4SAE0W-40
-30–46°C(-22–115°F)
NOTE:CNHirecommendsSAE10W30forapplicationswherecontinuousoperationsabove38°C(100°F)ambient
temperatureorfrequentroadingapplications(above20–30min)arecommon.
NOTE:CNHirecommendsCASEAKCELAHYDRAULICEXCAVATORFLUIDforimprovedcoldweatheroperation.
StandardfactorylloilTUTELAAUTOSUPREME™ENGINEOILSAE10W-30isacceptableforcoldweatheroperation
whensufcientwarmuptimeisprovided.
4806031928/08/2017
19