2-23
S
SAFETY PRECAUTIONS
F1458
F5832
F24668
PRACTICE SAFE MAINTENANCE
Understand service procedures before doing work.
Keep work area clean and dry.
Never lubricate or service the machine while it is
moving.
Keep hands, feet and clothing from moving parts.
Before servicing the machine, park the machine on a
level surface.
If maintenance procedure must be performed with
engine running, do not leave machine unattended.
If the machine must be raised, keep a 90 to 110°
between boom and arm. Securely support any ma-
chine elements that must be raised for service work.
Never work under a machine raised by the boom.
Inspect certain parts periodically and repair or replace
as necessary.
Keep all parts in good condition and properly installed.
Fix any damage immediately.
Replace worn or broken parts.
Remove any building of grease, oil, or debris.
Disconnect the ground cable (-) from the batteries
before servicing electrical systems or welding on the
machine.
To Next Page
Loading...
