2-33
S
SAFETY PRECAUTIONS
F1480
F58
F1479
WORK IN A CLEAN AREA
Before starting a job, clean the work area.
Remove objects that may be a safety hazard to the
mechanic or bystanders.
SAFELY ILLUMINATE WORK AREA
Illuminate your work area adequately and safely.
Use a portable safety light for working inside or under
the machine.
Make sure the bulb is enclosed by a wire cage.
The hot filament of an accidentally broken bulb can
ignite spilled fuel or oil.
USE PROPER TOOLS
Use tools appropriate to the work. Makeshift tools and
procedures can create safety hazards.
Use power tools only to loosen threaded tools and
fasteners.
For loosening and tighening hardware, use the correct
size tools. Do not use U.S. measurement tools on metric
fasteners. Avoid bodily injury caused by slipping
wrenches.
Use genuine spare parts only.
To Next Page
Loading...
