To Next PageTo Next Page
Need help?Do you have a question about the Casella APEX Series and is the answer not in the manual?
General| Brand | Casella |
|---|---|
| Model | APEX Series |
| Category | Water Pump |
| Language | English |
General safety warnings and precautions applicable to all Apex pump models.
Specific safety warnings and instructions for Intrinsically Safe models in hazardous areas.
Explains the function of the instrument's four-key control panel for navigation and operation.
Details the various icons and symbols used on the instrument's display screen for status indication.
Describes the function of LEDs, buzzer, and specific messages shown on the display.
Provides instructions on charging different types of battery packs for the Apex pumps.
Details how to power the instrument on, off, and enter Hold Mode.
Guides users through calibrating the pump's flow rate using a flow meter.
Explains how to access and change basic instrument settings like language and units.
Describes how to start sampling and what is displayed during operation.
Explains how the pump responds to restricted inlet or outlet flow conditions.
Details how to use the pump to fill a gas bag automatically.
Instructions for using the low flow adaptor for sampling at very low flow rates.
How to set the pump to sample for a specific period before automatically switching off.
Instructions on how to lock the keypad to prevent unauthorized changes.
Explains the Time Weighted Average sampling mode for timed exposures.
Describes how to use pre-programmed sampling schedules downloaded from PC software.
An overview of the Pump Manager software's capabilities and purpose.
Detailed steps for installing and removing the Pump Manager software from a PC.
How to set up the IR link for communication between the pump and PC software.
Steps to configure Pump Manager and add pump/person details.
Instructions for downloading sampling data from the pump to the PC.
How to view, add to, and print collected sample data and reports.
Guide to creating and transferring sampling programs to the Apex Pro pump.
Details specifications for flow range, performance, and battery for different Apex models.
Provides performance data related to filter type, pressure load, and battery life.
Lists the EMC and LVD standards the Apex pumps comply with.
Details approvals and certifications for Intrinsically Safe models.
Displays the EC-Type Examination Certificate for Intrinsically Safe models.
Provides the EC Declaration of Conformity for the Apex series pumps.
Outlines routine maintenance procedures for the Apex Personal Air Sampling Pump.
A table listing common faults and their suggested remedies.
Lists part numbers for pumps, accessories, and chargers.
