Do you have a question about the Casio 3408 and is the answer not in the manual?
Illustrates button operations using letters for clarity and reference.
Notes that product illustrations are for reference and may differ from the actual product.
Instructions on how to change modes using the 'C' button.
How to illuminate the watch face by pressing the 'B' button in any mode.
Procedure to set the current time and date, including seconds, hour, minute, year, month, and day.
How to switch between 12-hour and 24-hour time formats.
Procedure to toggle between Daylight Saving Time (DST) and Standard Time.
Explains how to measure elapsed time, lap times, split times, and two finishes.
Steps to start, stop, resume, and clear elapsed time measurement.
How to measure and record lap times during an elapsed time measurement.
How to measure and record split times during an elapsed time measurement.
Procedure to record times for the first and second place finishers.
Details on how stopwatch data is stored in memory and memory capacity.
Explains how data is stored based on stopwatch button operations.
Steps to recall stored lap and split time records from memory.
Procedure to delete a specific log entry and its records from memory.
How to start, pause, resume, and stop the countdown timer.
Procedure to set the countdown start time and auto-repeat function.
Descriptions of different alarm types: Daily, Date, 1-Month, and Monthly.
Step-by-step guide to setting alarm time, date, and type.
How to manually trigger and test the alarm sound.
How to select between one-time and snooze alarm operation for Alarm 1.
How to turn Alarms 2 and 3 on or off.
How to enable or disable the hourly time signal.
Procedure to set the dual time, including DST and time adjustments.
How to manually turn on the watch's LED illumination.
How to select the illumination duration between 1.5 and 3 seconds.
How the auto light switch activates illumination based on wrist movement.
Procedure to enable or disable the auto light switch feature.
Important notes regarding auto light switch usage, battery life, and environmental factors.
Describes how the watch automatically saves settings and exits screens after inactivity.
How to turn the button operation tone on or off.
Illustrates button operations using letters for clarity and reference.
Notes that product illustrations are for reference and may differ from the actual product.
Instructions on how to change modes using the 'C' button.
How to illuminate the watch face by pressing the 'B' button in any mode.
Procedure to set the current time and date, including seconds, hour, minute, year, month, and day.
How to switch between 12-hour and 24-hour time formats.
Procedure to toggle between Daylight Saving Time (DST) and Standard Time.
Explains how to measure elapsed time, lap times, split times, and two finishes.
Steps to start, stop, resume, and clear elapsed time measurement.
How to measure and record lap times during an elapsed time measurement.
How to measure and record split times during an elapsed time measurement.
Procedure to record times for the first and second place finishers.
Details on how stopwatch data is stored in memory and memory capacity.
Explains how data is stored based on stopwatch button operations.
Steps to recall stored lap and split time records from memory.
Procedure to delete a specific log entry and its records from memory.
How to start, pause, resume, and stop the countdown timer.
Procedure to set the countdown start time and auto-repeat function.
Descriptions of different alarm types: Daily, Date, 1-Month, and Monthly.
Step-by-step guide to setting alarm time, date, and type.
How to manually trigger and test the alarm sound.
How to select between one-time and snooze alarm operation for Alarm 1.
How to turn Alarms 2 and 3 on or off.
How to enable or disable the hourly time signal.
Procedure to set the dual time, including DST and time adjustments.
How to manually turn on the watch's LED illumination.
How to select the illumination duration between 1.5 and 3 seconds.
How the auto light switch activates illumination based on wrist movement.
Procedure to enable or disable the auto light switch feature.
Important notes regarding auto light switch usage, battery life, and environmental factors.
Describes how the watch automatically saves settings and exits screens after inactivity.
How to turn the button operation tone on or off.
| accuracy at normal temperature | ± 30 seconds a month |
|---|---|
| time format | 12-hour and 24-hour |
| calendar system | Full Auto-calendar pre-programmed from the year 2000 to 2099 |
| measurement capacity | 99 hours, 59 minutes, 59 seconds |
|---|---|
| measurement unit | 1/100 second or 1 second |
| memory capacity | 60 records |
| measuring unit | 1 second |
|---|---|
| input range | one minute to 24 hours |
| other | Auto-repeat timing |
| battery type | CR2016 |
|---|---|
| battery life | approximately 7 years |
| battery usage | 10 seconds of alarm operation per day, one illumination operation (1.5 seconds) per day |
Loading...