1
Operation Guide 5001
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use D to display the city code
(time zone) whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down A for about one second to toggle between
Daylight Saving Time (DST indicator displayed) and
Standard Time (DST indicator not displayed).
• The DST indicator is on the display whenever you
display a city code for which Daylight Saving Time is
turned on.
• Note that the DST/Standard Time setting affects only the
currently displayed city code. Other city codes are not
affected.
• You cannot toggle between Daylight Saving Time and
Standard Time if the displayed city code is the city code
that is currently selected as the Home City in the
Timekeeping Mode. To change the DST setting of your
Home City, use the procedure under “To set the digital
time and date”.
MA0706-EA
About This Manual
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• For the sake of simplicity, the sample displays in this
manual do not show the analog hands of the watch.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
Timekeeping Mode World Time Mode Alarm Mode Stopwatch Mode Edit ModeCountdown Timer Mode
Press .
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press B to illuminate
the display for about two seconds.
Timekeeping
This watch features separate digital and analog timekeeping. The procedures for
setting the digital time and analog time are different.
• Pressing D in the Timekeeping Mode will toggle between the Time/Day screen and
the Day/Time screen.
PM indicator Day
Day of week
Seconds
Hour : Minutes
Month-Day
Day of week
Seconds
Press .
Time/Day Screen Day/Time Screen
Read This Before You Set the Digital Time and Date!
The times displayed in the Timekeeping Mode and World Time Mode are linked.
Because of this, make sure you select a city code for your Home City (the city where
you normally use the watch) before you set the time and date.
• To view the current Home City code setting, press A while in the Timekeeping
Mode.
• For full information on city codes, see the “City Code Table”.
To set the digital time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Screen
50
10:58
2008
Do this:
Press D.
Use D (east) and B (west).
Press D.
Use D (+) and B (–).
Use D (+) and B (–).
To do this:
Reset the seconds to
00
Change the city code
Toggle between Daylight Saving Time (
ON
)
and Standard Time (
OF
)
Change the hour or minutes
Change the year
Change the month or day
Seconds DST
Hour
Minutes
YearDay
City Code
Month
3. When the setting you want to change is flashing, use D and B to change it as
described below.
• See “Digital Time Daylight Saving Time (DST) Setting” for details about the DST
setting.
DST indicator
On/Off status
4. Press A to exit the setting screen.
• Resetting the seconds to
00
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
00
without changing the minutes.
• The year can be set in the range of 2000 to 2099.
• The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
• A leading zero is added to dates from 1 through 9.
Example: The 1st of the month is displayed as 01.
Digital Time Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the digital time setting by one hour
from Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C twice to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time (
ON
)
and Standard Time (
OF
).
4. Press A to exit the setting screen.
• The DST indicator appears on the Timekeeping Mode,
Alarm Mode and Edit Mode screens while Daylight
Saving Time is turned on.
DST indicator
Current time in the zone
of the selected city code
Current seconds count
City code
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
• All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C.
To view the time for another city code
In the World Time Mode, press D to scroll eastwardly
through city codes.
• For full information about city codes, see the “City Code
Table”.
• If the current time shown for a city is wrong, check your
Timekeeping Mode time and Home City code settings
and make the necessary changes.
To Next Page
Need help?
General
