To Next PageTo Next PageWhy does the current time setting change on my Casio 5193 Watch after I set it manually?
The current time setting may be changing automatically because the watch is set to Auto Receive the time calibration signal. If this is causing an incorrect time, verify your Home City setting and correct it if needed.
Why is the current time setting off by hours on my Casio 5193 Watch?
The current time setting may be off because your Home City setting is wrong. Check your Home City setting and correct it if necessary.
Why is the current time setting off by one hour on my Casio Watch?
If you are in an area where time calibration signal reception is possible, configure Home City settings. If you are in an area where it is not possible, manually change your Home City’s STD/DST setting.
What to do if the current time setting is off by one hour on Casio 5193 Watch?
Perform the operation under “To get ready for a receive operation”. The time setting will be adjusted automatically as soon as signal reception is successful. If you are unable to receive the time calibration signal, change the STD/DST setting manually.
Why is my Casio Watch World Time off?
Your Home City setting may be incorrect. Verify your Home City setting and correct it if necessary.
What to do if hands and/or day indications are off on Casio 5193 Watch?
The hands and/or day indications may be off because the watch has been exposed to magnetism or strong impact. Adjust the watch’s hand and day home position alignment.
Why is the World Time on my Casio 5193 one hour off?
The STD/DST setting of the selected World Time City may be incorrect. Select the correct STD/DST setting.
What to do if hands suddenly stop moving on Casio Watch?
The watch may be in the power recovery mode. Do not perform any operation until the hands return to their normal positions (in about 15 minutes). To help power recover, leave the watch in a location where it is exposed to light.
What to do if all hands are stopped at 12 o'clock on Casio Watch?
The watch’s hands may be stopped at 12 o’clock because the power is low. Expose the watch to light until the x Second Hand starts moving normally, at one-second intervals.
Why is the second hand moving at two-second intervals on my Casio Watch?
The x Second Hand may be moving at two-second intervals because the power is low. Expose the watch to light until the x Second Hand starts moving normally, at one-second intervals.
General| Model | 5193 |
|---|---|
| Brand | Casio |
| Category | Watch |
| Type | Digital |
| Case Material | Resin |
| Display Type | Digital |
| Band Material | Resin |
| Accuracy | ±15 seconds per month |
| Features | Stopwatch, Countdown Timer, 5 daily alarms, Hourly time signal |
| Calendar | Full Auto Calendar (to year 2099) |
| Backlight | Electro-luminescent |
Essential checks before operating the watch for the first time.
How to check the watch's power level using the second hand.
Explains the mode where hand operation stops temporarily when power drops.
Steps to take to exit the watch's sleep state.
Details on signal reception range for different transmitters.
Steps to prepare the watch for receiving time calibration signals.
Automatic daily reception of time calibration signals.
How to initiate a manual time calibration signal receive operation.
How to verify the outcome of the last signal reception attempt.
Important notes and warnings regarding atomic timekeeping.
How to navigate and switch between the watch's different modes.
Using the Timekeeping Mode to view current time and date.
Steps to select your Home City and its daylight saving time setting.
How to switch between standard and daylight saving time for the Home City.
Procedure to manually adjust the watch's current time.
Procedure to manually adjust the watch's current date.
How to measure elapsed time using the stopwatch feature.
How to pause the stopwatch to record split times.
How to set the duration for the countdown timer.
How to start and stop the countdown timer.
How to check the time in 29 different world time zones.
How to adjust DST settings for selected world time zones.
Procedure to exchange Home City and World Time City settings.
How to set the desired time for the daily alarm.
How to enable or disable the daily alarm.
How to silence the alarm when it sounds.
Correcting hand and day alignment when they are off.
Problems related to the movement and alignment of watch hands.
Issues causing incorrect hour or day indications for the current time.
Problems with the displayed time for different time zones.
Troubleshooting steps when the watch does not resume operation after charging.
Diagnosing issues with time calibration signal reception.
Technical specifications for accuracy, timekeeping, and calendar.
Technical details for stopwatch and countdown timer functions.
Technical details for world time and alarm features.
Information on the watch's power source and battery life.
