Casio 5419 User Manual

World Time City Settings
Setting a World Time City for CASIO
WATCH+ causes the current time in that
city to be indicated by the hands of the
dial at 9 o’clock.
World Time hour (24-hour)
World Time
hour and
minute
Note
●
CASIO WATCH+ World Time
lets you select from among
approximately 300 cities as the
World Time City.
●
You can also swap your Home
Time and World Time as
required.
●
Selecting a World Time City
1.
Y Tap the “CASIO WATCH+” icon.
2.
X Hold down (C) for about 0.5
seconds.
This establishes a connection
between the watch and phone.
3.
Y Tap “World time”.
4.
Y Perform the operation shown on
the phone screen.
●
Swapping Your Home Time and
World Time
1. Hold
down (A) for about two seconds
to enter the Calendar Mode.
2.
Hold down (B) for about three
seconds.
The watch’s main hour hand and
minute
hand will
move to the current
World Time.
●
The hands of the dial at 9 o’clock
will move to the current Home
Time.
After swappingBefore swapping
Note
●
This function comes in handy
when you need to move to
another time zone. For details
about how to
use it, see “Moving
to Another Time Zone”.
Viewing Stopwatch Data
Features
This section explains how to send lap
times and split times (up to 100 records)
stored in watch memory, as well as the
best lap, average speed, and other data
to your phone for viewing with CASIO
WATCH+.
Sending Stopwatch Data to a
Phone
Use the procedure below to send data
from the watch to a phone.
1.
Y Tap the “CASIO WATCH+” icon.
2.
X Hold down (C) for about 0.5
seconds.
This establishes a connection
between the watch and phone.
3.
Y Tap in the following sequence: f
n “Data Box”.
4.
Y Tap “Data transfer”.
This displays a list of stopwatch data
on the phone.
●
Tapping a stopwatch data item
displays its details.
Checking a Lap Time
Use CASIO WATCH+ to check the data
you sent to the phone.
1.
Y Tap the “CASIO WATCH+” icon.
2.
Y Tap in the following sequence:
“Data Box” n “EQB-500”.
3.
Y On the list of stopwatch data, tap
the item you want to look up.
This displays the details of the
tapped stopwatch data.
Note
●
Tapping “Edit” displays
a screen
that you can use to change the
data item title and to delete lap
time data.
Viewing Speed Data
Use the procedure below to configure the
watch to indicate speeds.
1.
Y Tap the “CASIO WATCH+” icon.
2.
X Hold down (C) for about 0.5
seconds.
This establishes a connection
between the watch and phone.
3.
Y Tap “Stopwatch”.
4.
Y Use the screen that appears to
specify the distance and distance
unit.
Operation Guide 5419
5

Casio 5419 Specifications

General

Brand	Casio
Model	5419
Category	Watch
Language	English