Casio BN-10 - User Manual

Other manuals for Casio BN-10

Questions and Answers

E
Erin MullinsAug 11, 2025
Why does nothing appear on my Casio Organizer display when I turn it on?
- J
  Jeremiah JohnsonAug 11, 2025
  If nothing appears on the display of your Casio Organizer when you turn it on, it could be due to several reasons. First, check if the battery switch on the back is set to 'REPLACE BATTERIES'; if so, slide it to 'NORMAL OPERATION'. Secondly, the battery power might be low, in which case you should replace the batteries. Lastly, the display contrast might be too light; try adjusting it.
H
harry72Aug 17, 2025
Why does my Casio Organizer suddenly turn off or show the contrast adjustment screen?
- A
  adam49Aug 17, 2025
  If your Casio Organizer suddenly turns off, or the contrast adjustment screen appears unexpectedly, it is likely due to low battery power. Replace the batteries to restore normal operation.
C
Christopher MeyerAug 23, 2025
What to do if nothing happens when I press the keys on my Casio Organizer?
- A
  Ashley PerezAug 23, 2025
  If your Casio Organizer's keys aren't responding, it could be due to low battery power. Try replacing the batteries. Alternatively, external conditions might be interfering with its operation. In this case, press the P button and then the RESET button.
M
marthamartinAug 29, 2025
Why is the display on my Casio BN-10 Organizer totally black?
- M
  Mr. David SweeneyAug 29, 2025
  If the display on your Casio Organizer is completely black, it probably means the display contrast is set too dark. Try adjusting the display contrast.
G
Gregory YoungSep 5, 2025
What to do if my Casio BN-10 Organizer doesn't work after replacing batteries?
- M
  Michael BrownSep 5, 2025
  If your Casio Organizer doesn't operate normally after replacing the batteries, there may be an issue with the unit's operational settings. To resolve this: Slide the battery switch to 'REPLACE BATTERIES' and remove the battery cover. Use a thin object to press the P button inside, then replace the cover and switch back to 'NORMAL OPERATION'. Next, use a thin object to press the RESET button on the back. After this, adjust the display contrast and press ESC to clear any messages.