Casio CT-640 - Playback and Memory Notes

NOTE:
You can record changes in the following operations as well
as keyboard play during recording.
Changing preset tones
Changing tone banks
Changing auto-rhythms
Starting or stopping a rhythm
Starting a rhythm using intro start
Inserting the fill-in patlerns of rhythms
Setting auto-harmonize on/off
Setting registration select (bank 1-4)
Ending the rhythm with the ending pattern
Q
Press
the
recording
start/stop
button
mamony
co
again to stop recording. oa
RECORD START/STOP
NOTES:
°
Memory
capacity
is
approximately
1250
notes.
Opera-
tions
such
as
changes
in
rhythms,
tones
or
Tone
Bank
sound
selections
are
counted
as
a
half-note.
*
Recording
automatically
ends
when
you
exceed
the
memory
capacity
9. Performance Memory Function
‘back’ memory“contents
(1) Press the recording start/stop button to mamony
es
play back your performance.
LED lights and the playback starts. RECORD —s »
e You can play whole keyboard with the playback if the
recording has been done in Casio Chord “OFF” mode.
lf you recorded in Casio Chord “ON” mode, only the
melody keyboard can be used.
e In this playback status, all switches and buttons except
volume sliders are inoperative.
* Tempo of playback cannot be adjusted.
(2) Press the recording start/stop button
again to stop the playback.
MEMORY
cS
RECORD Ls >