Casio CT-X3000 Firmware Update Guide

2
Fixed Problem with This Firmware
This firmware fixes the minor problem related the Registration function.
Updating Firmware
IMPORTANT!
All the user data will be deleted after the update. So back up necessary user data in Digital Keyboard memory to a USB flash drive before
updating the Digital Keyboard firmware.
Performing the firmware update procedure incorrectly can result in you are not being able to start up your Digital Keyboard. Be sure to
observe the point below.
 Do not disconnect the AC adaptor or remove the USB flash drive from the Digital Keyboard while firmware updating is in progress.
 Do not touch any buttons or keyboard keys, except as required for updating, while firmware updating is in progress.
Perform the steps below to update.
1. Copy the “CTX3000R.upd” firmware file to a USB flash drive.
 Use a USB flash drive that has been formatted to FAT32.
 Place the “CTX3000R.upd” firmware file into the root (not a folder) of the USB flash drive.
2. Make sure the Digital Keyboard’s power is off. Then insert the USB flash drive from the step 1 into the Digital Keyboard’s USB flash
drive port.
3. While pushing the buttons below simultaneously, turn on the Digital Keyboard.
 [7] (WRITE)
 [8] (INSERT)
 [9] (DELETE)
4. Make sure “UPD MODE” is on the display.
UPD MODE
5. Pushing one of any buttons starts preparing for updating, then the display will be changed as below.
SETUP
6. When the Digital Keyboard is ready, the display will be changed as below.
SEL FILE
7. Make sure “CTX3000R” is on the display when you push any of the buttons.
CTX3000R
8. “OK?” will be displayed when you push the [6] (ENTER) button.
9. Pushing the [+] (YES) button starts updating.
 Firmware updating takes about 30 minutes. Do not touch the Digital Keyboard during that period.
 The display will be changed as “CHK nn%”  “WRT nn%”  “FIN nn%” as the update progresses.
10. When update is finished, “COMPLETE” will be displayed.
COMPLETE
11. Pushing any button turns the Digital Keyboard off. This completes the firmware update operation.

Casio CT-X3000 Specifications

General

MIDI-keyboard number of keys	61 keys
Metronome	Yes
Product color	Black, White
Sound effects	Chorus, Delay, Reverberation
Maximum polyphony (notes)	64
Display type	LCD
Interface	USB
Headphone outputs	1
Battery type	D
Input voltage	12 V
Power source type	AC, Battery
Number of batteries supported	6

Weight and Dimensions

Depth	384 mm
Width	948 mm
Height	116 mm
Weight	6900 g