Casio CTK-601 - Configuring MIDI Settings; Changing MIDI Parameter Groups; Group 1 MIDI Parameters; Group 2 MIDI Parameters

. MODE
Changing MIDI Settings
This keyboard lets you change a number of MIDI parameters,
including GM MODE ON/OFF, PITCH BEND, and others. _
Parameters are divided into two groups: Group 1 parameters
(accessed by pressing the TRANSPOSE/TUNE/ MIDI button
twice), and Group 2 parameters (accessed by pressing the
TRANSPOSE/ TUNE/ MIDI button three times).
REVERB
HALL GM
STAGE FREE
ROOM SESSION
SYNTH LAYER
MIXER
MEMORY bale
a RESPONSE
=
LLIKATIACAMEGIN LAMAN LUA A/LLIMAA
To change MIDI parameters.
a Press the TRANSPOSE/TUNE/MIDI button either
twice or three times to select the anes group
you want.
Group 1: GM MODE, KEYBOARD CHANNEL, MIDI IN :
CHORD JUDGE, LOCAL CONTROL, ACCOMP sj.
MIDI OUT oi
Group 2: PITCH BEND RANGE, NAVIGATE TRACK, AS-
SIGNABLE JACK TERMINAL
Example: To select eeeP 1.
2. Use the [4] and [p] cursor buttons to select the
parameter you want to change.
_ See “Parameters and Their Displays” for details on parameters.
Example: To select the KEYBOARD CHANNEL parameter.
E-44
$e PASTAS SELES OOS EEG TESE SERRE TO ERIS HES EERE ES SIOBS TSE ESET SUTTER TET LEDS E EEE SES ESSIEN EAR SESE EATERS LEE REI EBCU SORES EES EGET T.ESESL SEEDS E SSE ESS NESE SEES ISTE PSE RE DEEL ESL BESTE EEDA SEEDS E EES ERIE SEES AES EES SIE EEA BELLIES BOWE DEG LEASE SEES BSIBEE ’ LONSTRORS ;
TRANSPOSE/TUNE/MIDI
4 : - appaeabi sober’ ees Pee . sahiia ssa apbaakisi nies ecichianbsviiie tenant si sarnde heianeintos his netGantnarbasntiaonneione nansassaratie LOT RR ONT 5
meses eesmomteenaeepanee ieeeeeoneineeteeyon oe onan amen area meen em LRA ILLES SEILER LEBER ODE. SEREEOREIES
[<upvvicurson fyi]
3. Use [+] and [-] to change the setting of the parame-
ter.
Example: To change the KEYBOARD CHANNEL parame-
ter value to 2,
¢ If you accidentally go past the group you want, keep
pressing the TRANSPOSE/TUNE/MIDI button until the
group you want reappears on the display.
¢ If you leave the parameter selection screen on the dis-
play for about five seconds without doing anything, the -
parameter selection screen is automatically cleared.
Parameters and Their Displays
& Group 1 |
The Group 1 parameter selection screen is sediesiayed by press- :
ing the TRANSPOSE/TUNE/MIDI button twice.
@ GM MODE ON/OFF (Default: Off)
on: Turns GM MODE on. Select this setting when you want to
_ listen to GM data on an external machine. Turning GM
MODE on automatically turns MIDI INCHORD JUDGE off
(if it is on), because GM MODE and MIDI IN CHORD JUDGE —
cannot be used at the same time.
Sh Mewhe
ea
HALL GM
STAGE FREE
ROOM SESSION
LAYER
MIXER
ae su
STEP RESPONSE
—
idbiadb tbe
oFF: Turns GM MODE off. The tone, volume and other parame-
ter settings of each channel are initialized. When the re-
ceived MIDI data is played, bass tones are lowered by one »
octave and the pecego tone is reee byo: one octave.
REVERB
TOUCH
cE
STEP RESPONSE
HALL "sh dane ul on GM
STAGE o [4 Ey FREE
ROOM a wt al SESSION
MIXER
MEMORY ae
7
Tidal
452A-E-046A .
mi KEYBOARD CHANNEL (Basic Channel) (Default: 01)
This parameter sets the channel for sending keyboard, pitch
bender, and other MIDI messages.
ait he lth
Mi MIDI IN CHORD JUDGE ON/OFF (Default: Off)
on: The keyboard determines basic channel note data as auto
accompaniment chords in accordance with the chord finger-
-ing method selected by the MODE switch. Turning GM
MODE on automatically turns MIDI INCHORD JUDGE off,
because GM MODE and MIDI IN CHORD JUDGE cannot
be used at the same time.
mi LOCAL CONTROL ON/OFF (Default: On) _
on: Turns LOCAL CONTROL on, which sends data generated |
by the keyboard or drum pads simultaneously to the key-
board’s local sound source and as a MIDI message from the
MIDI OUT terminal. .
oFF: Turns LOCAL CONTROL off, whichis sends data seneiaiea
by the keyboard or drum pads as a MIDI message from the
MIDI OUT terminal, but not to the keyboard’s local sound
source. Turn off LOCAL CONTROL whenever using MIDI
THRU on an externally connected machine.
i ACCOMP MIDI OUT ON/OFF (Default: Off)
on: Turns ACCOMP MIDI OUT on, which sends a MIDI mes-
sage from the MIDI OUT terminal whenever Auto Accom-
paniment plays.
452A-E-047A
oFF: Turns ACCOMP MIDI OUT off, which does not send a MIDI
message from the MIDI OUT terminal whenever Auto Ac-
companiment plays.
Group 2
The Group 2 parameter selections screen is Sie by press-
ing the TRANSPOSE/ TUNE/MIDI button three times.
ma PITCH BEND RANGE (Default: 02)
This parameter sets the range maximum change by the pitch -
bender in a range of 01 (1 semitone) to 12 (12 semitones).
|—hUra a, Hal
U c oe
ml NAVIGATE TRACK (Default: 1) . :
This parameter specifies whether or not the number of the mem-
ory tracks (1 through 6) whose data is being played back should
be displayed on the screen.
Immediately after you finish a record or track edit operation,
the last track you recorded to automatically becomes the navi-
gate track.
mi ASSIGNABLE JACK TERMINAL (Default: SUS)
This parameter specifies the function of the foot pedal. __
See page E-8 for celal on each of the navellable foot pede func-
tions.
_SUS (sustain): Specifies that a sustain effect should be eRPHed
when the pedal is ea cateaa
JUD
SoS (sostenuto): Specifies that a sostenuto effect should be ap-
plied when the pedal is depressed.
SFt (soft): Specifies that a soft effect should be applied when the —
fre is depressed.
E-45