20
4. As soon as the menu no. 4 is selected in Fig. 2.12, the following screen in Fig. 2.13 will appear.
1 : MULTI INSTALL
2 : AP INSTALL
3 : DUPLICATE HT
4 : UTILITY
5 : PROTOCOL
6 : PORT
7 : SPEED
FLINK
SIR
115K
5. After selecting “4: UTILITY” in Fig. 2.13, the following screen will appear.
1 : SEND FILE
2 : RECEIVE FILE
3 : FORMAT DRIVE
4 : CHG MEM SIZE
5 : FILE MODE NORM
6. Select “2: RECEIVE FILE” in Fig. 2.14, and then “1: A DRIVE” or “2: B DRIVE” in Fig. 2.15.
The files will be downloaded to the terminal and you will be able to access them from an
application. In this case, the files are copied truly to the drive you have specified.
1 : A DRIVE
2 : B DRIVE
Fig. 2.13
Fig. 2.14
Fig. 2.15
To Next Page
Loading...