Casio DT-970M51E Hardware Manual

27
3.4. Applicable Standards
3.4.1. DT-970
The standards, directives, and requirements for the DT-970 Series are as in the table below.
Table 3-10 Applicable Standards M50E/M51E
Classification
Standard number (corresponding
to each latest edition)
Acquired
Worldwide
Wireless standard/
R&TC
Bluetooth compliance
authentication
Class 1 PRD 2.0
Class 2 PRD 2.0 Yes
Dust and splash resistant IEC60529 IP67 Yes
Europe
Safety standard/
safety
LVE ordinance (not applicable to
the HT itself, but because it is
subject to the R&TTE ordinance)
EN 60950-1
Yes
Laser/ LED EN 60825-1 Yes
Electromagnetic
standard/ EMC
EMC directive EMI EN 55022, EN61000-3-2,
EN61000-3-3
Yes
EMS EN 55024 Yes
Vehicle-mo
unted
Vehicle-mounted
device
ISO7637
Vehicle
directive
Vehicl
e-mou
nted
device
E-mark ECE Reg.10
Wireless standard R&TTE directive
WLAN/BT Discharge ETSI EN 300 328 Yes
EMC ETSI EN 301 489-17 Yes
EMF
EMF WLAN EN 62311
(A SAR trial is required for
transmission power of 20mW or
more, and for distance of 20cm or
less)
BT EN 62311 (as above) Yes
NFC EN 50364 (as above)
WAN GSM/
WCDMA
EN 62311 (as above)
SAR EN62479 (body) Yes
GCF
WAN GSM/
WCDMA
Protocol GTCF-CC (WAN module only,
compliance is not certified for the
whole unit)
Continue.

Casio DT-970M51E Specifications

General

Brand	Casio
Model	DT-970M51E
Category	Data Loggers
Language	English