Casio FX-300ES PLUS

fx-300ES PLUS 2nd Edition Quick Start Guide
7
1. Enter the function (f)x = 2x + 1 by pressing
2Q)+1.
2. Press = to store that function. Another function can
be entered to compare the two functions. Press = to
move to the next screen and only have one function
entered.
3. Set a starting x-value for the table. The default value
is 1. To change the value, enter the new value and
press =. To keep the existing value, press =.
4.Next,setanendingx-valueforthetable.Thedefault
 valueis5.Tochangethevalue,enterthenewvalue
and press =. To keep the existing value, press =.
TABLE MODE
TABLE generates a number table based on one or two functions, entered as f(x) and/or g(x). Press
w3 to enter TABLE mode.
Note: Be sure to input the x variable (Q)) when generating a number table. All other variables will be
handled as constants.