02
Calculator Operation in Examination Mode
1. Entering Examination Mode causes icon
to flash on the
display. The flash rate of the icon slows down about 15
minutes after entering Examination Mode.
2. Pressing
an
causes the dialog box shown below to
appear. The dialog box shows the elapsed time in
Examination Mode.
2
Exiting Examination Mode
Exiting Examination Mode by Connecting to a computer
1. Use the USB cable to connect the calculator that is in the Examination Mode to a computer.
There are three ways to exit Examination Mode.
2. When the “Select Connection Mode” dialog box appears on
the calculator, press the calculator’ s
q
key.
3
1
4. On the computer, click the toolbar
button .
3. On the computer, start up the FA-124 software.
fx-9860GII Software Version 2.09
To Next Page
Loading...
