1 -5
Before Beginning Calculations..
■Calculation priority sequence
This calculator employs true algebraic logic to calculate the parts of a formula
in the following order:
©Coordinate transformation
Pol (*, y), Rec (r, 0)
©Type A functions
With these functions, the value is entered and then the function key is pressed.
X2, X~\ x\, °, r, 9, °* ”
© Power/root
xyt T
© Fractions
ab/c
©Abbreviated multiplication format in front of ir, memory or parenthesis
27r, 4R, etc.
©Type B functions
With these functions, the function key ¡stressed and then the value is entered.
V~, V~, log, In, ex, 10*, sin, cos, tan, sin-1, cos-1, tan-1, sinh, cosh, tanh,
sinh-1, cosh-1., tanh-1, (-), Abs, Int, Frac, parenthesis, (following in BASE-N
calculations only) d, h, b, o, Neg, Not
©Abbreviated multiplication format in front of Type B functions
2V3, A log2, etc.
® x , +
® + , -
©and -i
^ BASE-N calculations only.
©or, xor, xnor J 3
© Relational operators <, >, =, * , <, >
*When functions with the same priority are used in series, execution is performed
from right to left
e*lnVT20 -► e^(ln(Vl20)}
Otherwise, execution is from left to right.
* Compound functions are executed from right to left.
* Anything contained within parentheses receives highest priority.
- 3 0 -
To Next Page
Loading...
