Casio fx9750GII - Conversions and Commonly Used Keys; Unit Conversions and Key Usage

Conversions [in RUN-MAT]
Converting between units of measure can be performed on the FX9750GII using the CONVersion which is accessed via
the OPTN key. The [F1] key is the conversion tool, note that it is on each conversion page.
Example
Convert 20 m/s into km/h (kilometres per hour). Result
Enter
2 0 F6 F3
[VELO]
1
or
EXE
m/s selected
F1
[ ]
F3
[VELO]
2
or
EXE
km/h selected
then
EXE
cont. on next page
KEY
RESULT
Example 2
Convert the area of 2000 m
2
into km
2
. Result
Enter
2 0 0 0 F3
[AREA]
2
or
EXE
m
2
selected
F1
[ ]
F3
[AREA]
4
or
EXE
km
2
selected
then
EXE
Commonly used keys
Some of the functions available as keys on a scientic calculator are not immediately obvious on a graphics
calculator. Some searching is required in the OPTN menu.
Below is a table of some commonly used functions and where they are found on the graphics calculator. An
example is shown for each.
Length Area Volume Time Temperature Velocity Mass Force Pressure Energy Power
MISCELLANEOUS FUNCTIONS