Casio PCR-T295 - Other Character and Message Settings

54
Advanced features
Other character settings
You can also set clerk names and receipt messages.
 Setting receipt message
There are ve lines for receipt message as shown below.
YOUR RECEIPT
THANK YOU
CALL AGAIN
01−21−2015 15:17
4
3
2
1
5
1 Line No.1
2 Line No.2
3 Line No.3
4 Line No.4
5 Line No.5
You can set message line by line.
Sample Operation
Line No. 1 CASIO Programming to print CASIO on top of the receipt.
Step Operation
1 Turn the Mode switch to PGM position and press X and
o keys to make the Register in the program mode.
Xo
2 Enter the message number (in this example 1), and press
u key. The Register is set to program the rst line of the
receipt message.
Zu
3 Input message of the rst line.
In this example,
CASIO .
h <<< ' <
<DBL> <C> <►> <A>
ZZZZ VVV
<S> <I>
NNN
<O>
4 Press p key to set the message of the rst line. If you
wish to set another line, repeat steps 2 through 4.
p
5 Press o key to complete the setting.
o