Casio PG-380 - Setting Note Bend Range; Trigger Pickup Sensitivity Adjustment

Setting Bend
Range
By setting note bend range, you
can establish how far up you can
bend a preset/MIDI note when
the chromatic key is switched
OFF (normal status), Eight
different settings are possible, us-
ing microswitches 6, 7 and 8.
Trigger Pickup
Sensitivity
In some cases, you'll want to ad-
just the sensitivity of the trigger
pickup (pickup that triggers the
output of preset sounds or MIDI
sounds), for individual strings
When this sensitivity is increased,
NOTE ON (trigger output) mes-
sages are sent with only a light
touch, as are maximum velocity
messages. When decreased, the
opposite is true.
< Bend range setting > OQ=OFF @=O0N
swe SWw7 sws BEND RANGE
ie) Q at
ie} le e 3
le} e i) 5
O e e 7
e {e} 12
e ie) e 24
e e ie) 32
e e e 48
(* Units: half-tones)
In the POLY mode (see page 13), normal MIDI bend is only
possible on one string at a time. If you attempt to bend two or
more strings at ance, MIDI sounds hend only chromatically
To adjust trigger
pickup sensitivity
(DRemove the rubber cover
protecting the sensitivity con-
trols on the back of the guitar.
Performance 10