Casio SF-5590SY - All-Reset Procedure; Home Time Mode; Daily Alarm Function

The
time
kept
in
the
Home
Time
Mode
is
used
for
control
of
various
time
based
functions.
To enter the Home Time Mode
Press the HOME/WORLLD key once.
NEW YORK
JAN 421993 <¢THLD
AM 12:88 BY
To set your Home Time zone
4.
Inthe
Home
Time
Mode,
press
FUNC
and
then
select
“Time
zone
change”.
2
Use
&
and
¥
to
scroll
through
the
city
names.
e
See
page
23
for
a
complete
list
of
time
zones.
3.
When
the
city
you
want
is
displayed,
press
OK.
e
You
can
shee
your
Home
Time
zone
later
if
you
like.
When
you
do,
only
the
zone
changes,
without
affecting
the
time
or
date
setting.
To set the time and date
1.
Inthe
Home
Time
Mode,
press
FUNC
and
then
select
“Time
set’.
«
The
hour
setting
flashes
on
the
display.
_
’
»
Use
<{
and
®
to
move
the
flashing
selection
around
the
display.
inutes.
2.
Input
numbers
for
the
year,
month,
day,
hour,
and
minu
e
Input
the
year
as
four
digits
in
the
range
of
1901
through
2099.
e
Use
12-hour
or
24-hour
format
depending
on
the
Home
Time
format
(page
19}.
¢ Allillegal input is ignored.
3.
With
12-hour
time
format,
press
A
for
AM
or
P
ior
PM.
4,
Press
OK
to
quit.
a
*
Pressing
OK
resets
the
seconds
count
to
“00”.
To switch between standard time and daylight saving time
In the Home Time Made, press FUNC and then select “Daylight savings”.
* This toggles to the opposite setting and returns to the Home Time Mode screen.
¢ indicates daylight saving time.
To switch between 12-hour and 24-hour timekeeping
In the Home Time Made, press FUNC and then select “12/24 hours”.
® This toggies to the opposite setting and returns to the Home Time Mode screen.
The AM/PM indicator indicates 12-hour timekeeping.
« The time format you select is applied far ali modes.
To select the date format
1. In the Home Time Mode, press FUNC and then select “Date format”.
2, Select the date format that you want to use.
* The following shows and example of each format
[1] Month/Date/Year: JAN 1, 1998 (THU}
[2} Date/Month/Year: 1 JAN, 1998 (THU)
[3] Year/Month/Date: 1998/1/1 (THU)
* The date format you select is applied in all modes.
Hf Using the Daily Alarm
The Daily Alarm, it sounds at the same time every day for 20 seconds and the Daily
Alarm screen appears.
To change the Daily Alarm time
1. In the Home Time Mode, press FUNC and then select “Daily alarm set”.
The hour setting flashes on the display.
Use <q and P to move the flashing.
2. Input numbers for the hour and minutes.
All illegai input is ignored.
3, For 12-hour time format, press A for AM or P for PM.
4. Press GK to quit.
‘« Pressing OK automatically turns on the alarm.
To turn the Daity Alarm on and off
1, Inthe Home Time Mode, press FUNC and then select “Daily alarm sound”.
2. Use <4 and P to turn the Daily Alarm on and off.
3. Press OK.
~19-