Casio SF-5590SY - Auto Power Off Function

—~26-
Times
« Use the 12-hour/24-hour format setting of the Home Time.
« With 12-hour format, press A for AM or P for PM.
Dates
e Use the preset date format {page 19}.
e The year input range is 19014 through 2099,
e You can enter 20th century years using only two digits (98 = 1998). 21st
century years must be entered in four digits.
Bi Display Formats
Two display formats (data display format and index display format) are used.
Press DISP CHNG to switch between the index and data display formats.
Data Display Format (Telephone Directory)
« The data display format shows all the entries.
e Use A and ¥ to scroll line-by-line.
Index Display Format (Telephone Directory}
Main eniry
F ANDERSON
BUSH MARY
Currently JOH
selected item
oh
CAO OOLAT ed I
* The index display format shows a list of one or two entries only.
* The item that is in the top line is the one that is currently selected.
* Use A and ¥ to scroll up and down. ,
Telephone Directory data is automatically sorted according to name entries.
To enter the Telephone Directory Mode
1. Press TEL to display the initial Telephone Directory Mode screen.
File title
Number of records
stored in area
26 J] KECORDS
Memory usage | _
Initial prompt
2, Press TEL again to change to another telephone file.
« Each press of TEL changes the file in the following sequence.
To input Telephone Directory data
1. Use TEL to display the initial screen of a Telephone Directory file.
2. Input the name last name first and press OK.
3. Input any telephone numbers, company name, address, e-mail address, and
note or title, pressing OK ajter each one.
« Prompts appear on the display telling you what to input.
After the last entry, pressing OK stores the data and returns to the index display
(page 26).
« Data is automatically sorted alphabetically according to the name entry.
Note
e You mustinputa name. After that, you can skip any entry by pressing OK without
inputting anything,
To change 4 file title
7. Use TEL to display the initial screen of a Telephone Directory file.
2. Press FUNC and then select “File title”.
-~O7-