Casio SF-5590SY - Setting Time Zones and Dates

—32—-
@ Highlighting Calendar Dates
You can highlight calendar dates to indicate holidays or other special evenis to
remember.
To highlight and unhighlight individual dates
1. Move the date cursor to the date.
2. Press SPACE to highlight or unhighlight ihe date.
To highlight days of the week for multiple weeks
Example: To highlight all Sundays from July 1998 to December 1999.
1. Inthe Calendar Mode, press FUNC and then select “Weekly holiday set’.
Starting month
Ending month
2. Input the start month {7} and year (98), and the end month (12} and year (99).
3. Press OK.
» SUN is flashing because it is selected.
4, Use <4 and » to move the flashing. Press SPACE to highlight or unhighlight a
day of the week.
» You can specify (highlight) as many days of the weeks as yau like.
5. After selecting the days you want, press OK.
* You can unhighlight any date by selecting it with the date cursor and pressing
SPACE.
To clear days of the week for multiple weeks
1. Inthe Calendar Mode, press FUNC and then select “Weekly holiday clear”.
2. input the start month and year, and the end month and year, and then press OK.
« At this time the message “Are you sure (Y/N)?” appears.
3. Press ¥ to unhighlight, or N to abort.
@ Working Day Count
Use the following procedures to count the number of working days.
To count working days
1. Move the date cursor to the start day.
2. Press FUNC and then select “Working day count’,
JAN 1998 JAH 1;1995 Starting date
SUMO TUWE THFR SH
Se 2m JAN 1.1995 Currently
M5 6 16 OE selected daie
Dean eh a
4) 19:20 2) 22 23:
GA 262128 29390E
Count
3. Use the A, Y, < and P to move the date cursor.
e The count changes whenever you move the date cursor.
« The date cursor does not stop at highiighted dates, and highlighted dates are
never counted.
« If you move the date cursor to a date before the starting date, the working day
count is negative.
@ Weekly Schedule Screen |
Aweekly schedule screen that lets you see everything for an entire week ata glance.
Selected day (flashing) Appointment scheduled during this time
Other Schedule
Keeper or j
Reminder events Part of a multiple-day schedule
To display the weekly schedule screen
1. Inthe Calendar Mode, move the date cursor to the week you want to view.
2. Press DISP CHNG.
* Use A and Wto move the date cursor day-by-day, or # and ¥ to jump week-
by-week,
3. Press ESC to return to the calendar screen.
-33-