Casio SF-5590SY - Daily Alarm Operation and Snooze

—36-
8.
After
you
finish
inputting
the
start
and
end
time,
press
»
to
move
to
the
alarm
time.
Use
A
and
©
to
select
the
alarm
time
type
and
input
an
alarm
time,
if
necessary.
While
the
alarm
time
is
selected,
pressing
&
and
W
selects
one
of
three
alarm
types.
,
Same-day
alarm.
This
type
of
alarm
is
indicated
when
the
first
alarm
time
that
appears
is
the
same
as
the
appointment
start
time
input
by
you
in
step
7.
This
is
the
only
type
of
alarm
that
allows
you
to
set
a
time.
Previous-day
alarm.
This
type
of
alarm
is
indicated
when
the
first
alarm
time
that
appears
is
*-24:00”.
This
type
of
alarm
sounds
24
hours
before
the
start
time
of
the
appointment
start
time
input
by you
in
step
7.
No
alarm.
When
there
is
no
time
shown
for
the
alarm
time,
it
means
that
no
alarm
is
set.
9.
After
making
the
alarm
time
settings
you
want,
press
OK
to
move
back
to
the
schedule type.
10.
While
the
cursor
is
in
the
description
text,
press
OK
to
store
all
the
data.
Note
«
You
must
input
a
description.
After
that,
you
can
skip
any
input
by
pressing
OK
without inputting anything.
B Schedule Alarms
An
alarm
sounds
for
20
seconds
and
the
corresponding
Schedule
Keeper
data
appears
on
the
display.
Note
the
following
important
points
when
you
are
using
a
Schedule
Alarm.
*
The
snooze
feature
is
applied
to
the
sarne-day
alarm
also
just
like
the
Daily
Alarm.
See
“About
the
snooze
feature”
on
page
20
for
details.
*
The
alarm
indicator
and
time
are
automatically
cleared
after
the
alarm
time
is
reached.
« If the alarm time is reached during data communications, the alarm does not
sound until you complete the communications procedure.
* The alarm may fail to sound if battery power is too low.
§ How Schedule Keeper Data is Sorted
The
following
shows
how
Schedule
Keeper
data
is
sorted
within
each
date.
1. By date
2. By time within the same date(data without time comes first)
@ Schedule Type Labels and Icons
Schedule Keeper Mode data includes an icon and a schedule type label. Initially,
schedule types are labelled “SCH TYPE 1” through “SCH TYPE 8", and the initial
default scheduie type icon is (3.
To change schedule type labels and icons
1. Press SCHEDULE to display the initial Schedule Keeper Mode screen.
2. Press FUNC and then select “Define type”.
3. Use & and W to move the pointer to the schedule type you want to change.
4, input up to 13 characters for ihe new label you want to use.
Skip this step if you don’t want to change the label or if you want to wait until after
you change the schedule type icon.
5. Fares Dee CHNG to display the menu of schedule type icons.
you do not want to change the icon assigned to this schedule t ki
5 through 7. 9 WPS, SIP StePS
6. Use A, W, 4 and P to move the cursor to the icon you want to use. Use #
and ¥ to move between menu screens.
7. When the icon you want is selected, press OK to register it and return to the
schedule type menu.
8. Press OK to store all your changes and return to the initial Schedule Keeper
Mode display.
You could change ihe schedule type label before pressing OK in step 8 if you
have not already done so. ,
*
To specify Schedule Keeper Mode index display contents
1. Press SCHEDULE to display the initial Schedule Keeper Mode screen, and then
press A, W, 4, or ¥ to change to the index display.
2. Press FUNC and then select “List type”.
Pointer (selected type)
Marker
(current setting)
3. Use & and W to move the pointer next to the schedule type you wantto change,
anid then use “€ and ® to change the setting.
a Schedule types set to “Yes” appear in the index display, while those set to “No”
o not.
4. Press OK to quit and return to the index display.
—37-