Casio SF-5590SY - Data Bank Operations; Inputting Text and Data

ense Manager Mode
With the Expense Manager you can store expense data and produce a report that
shows totals for any specific period.
To enter the Expense Manager Mode
1. Press EXPENSE to display the initial Expense Manager Mode screen.
File title
Number of records
stored in araa
Memory usage
Initial prompt
2. Press EXPENSE again to change to another Expense Manager file.
e Each press of EXPENSE changes the file in the following sequence.
EXPENSE-1 EXPENSE-2 EXPENSE-3
To input Expense Manager data
1. Use EXPENSE to display the initial screen of an Expense Manager file.
2. Input the date of the expense and press OK to advance to ihe expense type.
You can also start data input while the Expense Manager index display or data
display is on the screen by pressing FUNC and then selecting “Daily expense”.
Press < or P to display a menu of expense types.
Select an expense type and then press OK to advance to the amount.
« The icon assigned to the expense type you select appears on the screen.
aa
Input the amount of the expense and press OK to advance to the payment type.
Press <4 or io display a menu of payment types.
Select the payment type and then press OK to advance to the receipt indication.
Press <4 or ® to toggle between “Yes” and “No”, and then press OK to advance
to ihe note area.
9. Input any text you want as a memo.
10. While the cursor is in the note area, press OK to store all of the data.
O~ DD
To change a file title
1, Use EXPENSE to display the initial screen of an Expense Manager file.
2. Press FUNC and then select “File title’.
Cursor Current file title
3. Input up to 13 characters for the title.
4. Press OK to quit.
@ Expense Type Labels and Icons
Expense type data includes an icon and a label.
To change expense type labels and icons
1. Press EXPENSE to display the initial Expense Manager Mode screen.
2. Press FUNG and then select “Expense types”.
ES
ERTAINMENT
CELLAHEOUS
3. Use & and ¥ to move the pointer to the expense type you want.
4. input up to 13 characters for the label.
* Skip this step if you don’t want to change the expense type label or if you want
to wait until after you change ihe expense icon.
5, Press DISP CHNG to display the menu of expense icons.
« If you do not want to change the icon assigned to this expense type, skip steps
5 through 7.
6. Use A, V, 4 and to move the flashing cursor to the icon you want to use.
Use # and ¥ to move between menu screens.
7. When the icon you want is selected press OK to register it and return to the
expense type menu.
—45-