How to stop ice cubes sticking together in CASO DESIGN Ice Maker?
If the ice cubes from your CASO DESIGN Ice Maker are sticking together, it could be that the ice-making cycle is too long, or the water temperature in the inner tank is too low. To fix this, stop the ice maker, wait for the ice blocks to melt, and then restart it. Also, replace the water with water that has a temperature between 8-32°C.
Why does the indicator light up on my CASO DESIGN IceChef Pro Ice Maker?
If the indicator light on your CASO DESIGN Ice Maker is on, it could be due to a lack of water or the ice basket being full. To resolve this, either add water to the unit or remove the ice from the basket. After taking these steps, stop the ice maker and press the 'on/off' button again to restart it.
What to do if CASO DESIGN Ice Maker cycle is normal but no ice?
If your CASO DESIGN Ice Maker is running a normal cycle but not producing ice, it might be due to high room or water temperature. Ensure the room temperature is between 5-40°C and the water temperature is between 8-32°C. If the issue persists, contact customer service, as it could be due to insufficient cooling agent or a defective electronic component.
Provides an overview to familiarize users with the device and its functions.
Details the manual's role, safety, intended use, and care information for the device.
Explains the different warning levels (Danger, Warning, Attention, Please Note) used in the manual.
Specifies that the device is intended for household use in enclosed spaces for making ice cubes.
Provides crucial safety notices for handling the device, including age restrictions and supervision requirements.
Warns about storing flammable substances and blocking ventilation to prevent fire hazards.
Highlights the mortal danger from live wires and damaged power cables, requiring authorized electricians for repairs.
Provides safety notices for initial commissioning, warning about packaging materials and suffocation risks.
Details manufacturer's disclaimer for damages due to manual non-observance, improper repairs, or unauthorized modifications.
States that Braukmann GmbH reserves all rights to the document, subject to content and technical changes.
Lists the included components and instructs on examining the shipment for completeness and damages.
Details how to unpack the ice maker, remove packaging, and clean internal parts before first use.
Explains that packaging is recyclable and advises on proper disposal methods at designated collection points.
Outlines prerequisites for the setup location, including firm surface, load-bearing capacity, and environmental conditions.
Provides instructions for safe electrical connection, including checking data, using protective devices, and extension cable limits.
Emphasizes not leaving the device unsupervised during operation to allow for quick intervention in case of danger.
Explains the meaning of various indicators and symbols on the device's display and control panel.
Details the step-by-step process for operating the ice maker, including initial waiting period and button functions.
Provides safety instructions for cleaning, emphasizing unplugging the unit and avoiding flammable detergents.
Details the steps for cleaning the ice maker, including the ice basket and interior, before first use and regularly.
Explains how to use the cleaning function by pressing the clean button until the indicator blinks.
Warns that repairs should only be performed by qualified personnel to avoid user hazards and machine damage.
Lists common problems, their possible causes, and suggested solutions for the ice maker.
Instructs on proper disposal of old devices at collection points, highlighting safety precautions for flammable materials.
General| Brand | CASO DESIGN |
|---|---|
| Model | IceChef Pro |
| Category | Ice Maker |
| Language | English |
To Next Page