What to do if the mixer does not move anymore in my CASO DESIGN IceCreamer?
If the mixer in your CASO DESIGN Ice Cream Maker stops moving, it's likely because the ice cream mixture has become too hard. This triggers the motor's overheating protection. To resolve this, stop the ice cream program, mix the contents with a spoon until it becomes easier to move, and then restart the program by pressing the Start button again.
Why does my CASO DESIGN Ice Cream Maker display “E1” or “E2”?
If the display of your CASO DESIGN Ice Cream Maker shows an 'E1' or 'E2' error, it indicates that the motor's overheat protection has been activated. To fix this, switch the device off and then on again. If the problem persists after restarting, further assistance is needed.
How to remove the container stuck in my CASO DESIGN IceCreamer Ice Cream Maker?
If you're having trouble removing the container from your CASO DESIGN Ice Cream Maker after using the ice or cooling function, it's possible that moisture in the recess has caused the container to freeze. Wait for 1 to 2 minutes, and then try removing the container again.
Read this manual to familiarize yourself with the IceCreamer and its functions.
Explains the purpose and importance of the operating instructions for safe use.
Defines the different levels of warning notices (DANGER, WARNING, ATTENTION) used in the manual.
Outlines the manufacturer's liability limitations concerning device usage and modifications.
Details the copyright and rights reserved by Braukmann GmbH for the manual's content.
Specifies the device is intended for household use for making ice cream and yoghurt.
Provides crucial general safety notices for safe handling and use by various user groups.
Warns about fire hazards and the use of flammable materials near the appliance.
Highlights the mortal danger from electrical power and contact with live parts.
Provides safety notices during the initial commissioning of the device.
Lists the components included in the delivery and advises on transport inspection.
Provides step-by-step instructions for unpacking the ice maker.
Advises on environmentally friendly disposal of packaging materials.
Details the prerequisites for a safe and trouble-free setup location for the device.
Provides instructions for safe and proper electrical connection of the device.
Gives an overview of the device's main components, listing the mixer and container.
Informs about the location of the rating plate containing connection and performance data.
Instructs to clean the device before first use to remove production residues.
Describes the buttons, display, and rotary controller on the device's control panel.
Provides initial operation notices, including waiting times and filling instructions.
Guides on preparing ingredients and selecting programmes for ice cream and yoghurt.
Provides instructions on how to safely remove the ice cream or yoghurt from the container.
Explains the automatic follow-up cooling function for ice cream and yoghurt.
Provides a recipe for natural yoghurt, including ingredients and preparation steps.
Explains how to make creamy ice cream and provides a chocolate ice cream recipe.
Offers a basic sorbet recipe and a specific recipe for raspberry sorbet.
Provides essential safety instructions to follow before cleaning the device.
Details the cleaning procedure for removable parts and the device housing.
Warns that repairs must be carried out by qualified personnel to avoid hazards.
Lists common problems, their possible causes, and solutions for the ice cream maker.
Advises on proper disposal methods for old electrical devices and safety precautions.
General| Capacity | 1.5 liters |
|---|---|
| Voltage | 220-240 V |
| Features | LCD display |
| Frequency | 50 Hz |
| Model | IceCreamer |
To Next Page