Caso GourmetVAC 280 - User Manual

Questions and Answers

C
Christian PowellAug 11, 2025
Why is my Caso GourmetVAC 280 bag not holding vacuum after sealing?
- R
  Riley McintyreAug 11, 2025
  If your Caso Food Saver bag isn't holding the vacuum, it could be due to a defective bag. Try using another bag, and wrap paper around any sharp edges inside the bag. Alternatively, there may be leaks along the welding seam caused by creases, crumbs, grease, or liquids. In this case, open the bag, clean the upper internal part, and remove any foreign matter from the welding bar before resealing.
S
suttonelizabethAug 18, 2025
What to do if my Caso GourmetVAC 280 bag is not being sealed correctly?
- D
  donna67Aug 18, 2025
  If your Caso Food Saver bag isn't sealing correctly, it might be because the sealing bar is overheating, causing the bag to melt. Open the cover on the unit and let it cool down for a few minutes. Ensure you are using only specified bags and rolls, and carefully follow all the steps for vacuuming and sealing. Also, check that the roll or bag is positioned correctly.
M
Monica HarmonAug 26, 2025
Why is my Caso GourmetVAC 280 not creating a complete vacuum in the bag?
- Z
  zcamposAug 26, 2025
  If your Caso Food Saver isn't creating a complete vacuum, it could be that the open end of the bag is not completely inside the vacuum chamber. Make sure to position the bag correctly. Another reason could be that the bag is defective, so try selecting another bag. Also, check for any residue on the welding and the seal; if present, clean the welding/seals and retry once they are dry.
A
Anthony LinSep 2, 2025
How to fix a Caso Food Saver that does not turn on?
- L
  Lauren WilsonSep 2, 2025
  If your Caso Food Saver does not turn on, the power cord may be defective. In this case, send the device to Customer Service.