20
Version 270114
5. Installation and using your appliance
5.1 Safety
DANGER ELECTRIC SHOCK!
- Don’ t let the power supply cord touch hot parts
- Don’t let the power supply cord along a table or a counter
- Never poor water in the tank when the appliance is hot: wait until it has cooled down.
- Never poor hot water in the tank.
- The electric safety of this appliance is ensured only if it is correctly connected to an efficiently single
phase socket
WARNING !
Operating particularly in heating phases your appliance can reach very high temperature to avoid
injuries don’t touch hot parts. Do not use the appliance if it is damaged or if the power cord has been
damaged. If your appliance break down do not try to dismantle and repair it yourself. Only use the
original accessories supplied with your appliance.
DANGER ELECTRIC SHOCK!
The electrical safety of this appliance is ensured only if it is correctly connected to an efficiently earthed
system in accordance with electrical safety regulations. Make sure this basic safety requirement has
been complied with. If in doubt, have it checked by a qualified technician. Before connecting your
appliance make sure the specifications on the rating plate correspond with those of your power supply.
Remove all protective foils and packaging material prior to usage
To Next Page
Loading...
