Need help?Do you have a question about the CASSENS & PLATH REFLECTA/1 and is the answer not in the manual?
Diagram and labeling of the compass binnacle components.
Explains the compass's role, requirements, and lists key technical specifications.
Details of included items, correctors, and the compass's maritime approvals.
How to read headings and adjust the mirror head for optimal viewing.
Methods for direct heading reading and using the azimuth device for bearings.
Procedures for removing the hood and the compass from the binnacle.
Instructions for using the shadow pin and handling a spare compass.
Why and when compass adjustment is necessary, and preparation steps.
Using magnets and the binnacle to correct alignment and magnetic fields.
Adjusting heeling, D, and E correctors for vertical and asymmetrical magnetic influences.
Using the Flinder's bar to correct longitudinal field (B2) caused by weak iron.
Lubrication, routine service, and replacing illumination bulbs.
How to clean lenses and mirrors using a soft, non-scratching cloth.
Identifying physical defects and diagnosing static/dynamic indication errors.
Performing tests to check the compass card's pivot and jewel suspension.
Identifying spare parts and guidelines for compass fluid.
Steps for replacing the directional system, pivot, jewel, and cover glass.
Replacing bottom glass, filling fluid, and maintaining the gimbal ring.
Outline of installation steps and requirements for binnacle location.
Installing the reflection tube and preparing the compass foundation with cut-outs.
Mounting the binnacle, connecting illumination, and dimmer.
Wiring connections, final functional tests, and preparation for adjustment.
General| Category | Marine Equipment |
|---|---|
| Model | Reflecta/1 |
| Manufacturer | Cassens & Plath |
| Diameter | 130 mm |
| Liquid filling | Yes |
| Type | Compass |
| Material | Brass |
To Next Page