To Next PageTo Next Page
Need help?Do you have a question about the Cassese CS 20 CART and is the answer not in the manual?
General| Brand | Cassese |
|---|---|
| Model | CS 20 CART |
| Category | Tool Storage |
| Language | English |
Provides an overview of the CS20 CART underpinner and its features.
Lists all standard accessories included with the CS20 CART machine.
Details the machine's dimensions, capacity, and wedge compatibility.
Outlines optional accessories and extensions available for the CS20 CART.
Explains the warranty terms and conditions for the CS20 CART.
Instructions on how to properly level the CS20 CART machine for optimal performance.
Guide on connecting the air supply and setting the correct air pressure.
Steps for correctly positioning and adjusting the back fences for frame assembly.
Procedure for setting up the pre-clamping mechanism for securing mouldings.
Guidance on choosing the appropriate positions for inserting wedges based on moulding width/height.
Instructions on how to set and store preferred wedge positions for repeated use.
Details on selecting and positioning the top presser end for different frame types.
Explains the Cassese wedge system and its application for perfect frame corners.
Step-by-step guide for loading wedge cartridges into the machine.
Procedure for removing and inserting different sizes of wedge cartridges.
Comprehensive steps for assembling frames using the CS20 CART underpinner.
Instructions for removing the wedge distributor block for cleaning or maintenance.
Procedures for cleaning and lubricating the wedge distributor block.
Steps for safely removing the wedge driver blade for replacement.
Guide for installing a new wedge driver blade.
Troubleshooting steps for unjamming the wedge distributor block.
Instructions on how to remove the front panel for access to internal components.
Steps to slide down the back panel for easier access to mechanical parts.
Guide for replacing the wire-strainer in the wedge distribution channel.
