4
1 REMOVE ALL PARTS FROM BOX AND IDENTIFY THEM.
TELESCOPE W/MOUNT ATTACHED
TRIPOD(PREASSEMBLED)
MARS-EYE FINDER
EYEPIECES(6MM + 20MM )
ACCESSORY TRAY
CD-ROM
2. EXTEND TRIPOD LEGS EQUALLY AND TIGHTEN LOCKING KNOBS.
3. ATTACH TELESCOPE + MOUNT TO TRIPOD AS SHOWN.
(DO NOT OVER TIGHTEN)
C-80 TELESCOPE
ASSEMBLY INSTRUCTIONS
CAUTION: NEVER POINT YOUR TELESCOPE
AT THE SUN. VIEWING THE SUN WITH
THIS TELESCOPE OR EVEN THE UNAIDED
EYE CAN RESULT IN BLINDNESS OR OTHER
SERIOUS EYE DAMAGE.
4. ATTACH ACCESSORY TRAY
ACCESSORY TRAY
HOOK HOLDER
(1) SPREAD TRIPOD LEGS APART SO THE TRAY WILL FIT UNDERNEATH
(2) PLACE THE TRAY'S HOOK OVER THE HOLDER'S METAL ROD AND PUSH DOWN
(3) TIGHTEN THE HOLDER'S LOCKING KNOB TO HOLD THE ACCESSORY TRAY IN PLACE
LOCKING KNOB
WASHER
KNOB
NOTE : TENSION SPRING & WASHER
LOCATED HERE
To Next Page
Loading...