Castell Salvo SCP+ - User Manual

2
The Salvo Control Panel is designed as part of a safety system to prevent accidental drive aways. The Salvo Control Panel
ensures that the loading bay door cannot be opened before the vehicle airline is disconnected via the Salvo Susie coupling
and the key has been transferred from the coupling to the SCP
+
.
1
2
3
SCP
+
with bay controls
isolated, ready to receive key.
Insert key and turn clockwise.
SCP
+
with bay controls
energised, ready to open door
and deploy dock leveller.
U-Salvo-2013-E Issue 1
15
Salvo Control Panel (SCP
+
)
User Guide
The Salvo Control Panel Plus (SCP
+
) is the main interface between
the Salvo couplings and associated bay door controls. The SCP
+
comprises of a wall mounted panel with easy to use Castell
interlock key switch to allow operation of the bay. There is also
panel indication of status and operation. Installation is via plug in
terminals on the internally mounted PCB.
SCP
+
Temperature (Operating) Min: -25°C, Max: +55°C
Size 300mm(H) x 220mm(W) x 157mm(D) (172mm with Mounting)
Mounting Hole
160mm(H) x 140mm(W) (Mounting Plate) – M8 Fixings
260mm(H) x 160mm(W) (Enclosure) – M8 Fixings
Material
Enclosure – Mild Steel to BS 1449 HR4
Lock Portion – Stainless Steel 304/316
Weight 5.5 kg
Cable Entry Size M20 x 2
Switch Approvals IEC947-1.3 IEC947-5 BS EN60947 VDE 0660
UL Listed TBA
Ingress Protection IP55 Enclosure
Switch Rating Continuous, unattended, remote
Power Supply Required 24VDC
Max Power Consumption 20VA / 20W
Power Frequency 50/60Hz
Relay Specication Max switching voltage 240VAC 6A
Max switching current 6A
Operation
Specications

Summary

Salvo Control Panel SCP+ Precautions

Lockout Tagout Procedure

Procedure for safe installation and use of the SCP+ unit and related energy sources.

Salvo Control Panel SCP+ Installation 1;4

Specify SCP+ Location

Determining the optimal SCP+ location based on site requirements and control needs.

Mount SCP+ Unit

Mounting height recommendations and placement relative to traffic lights or dock controls.

Install Multi-core Cable

Considerations for cable type, core count, and routing for peripheral connections.

Salvo Control Panel SCP+ Installation 2;4

Install Traffic Lights

Connecting standard 24VDC traffic lights to specific SCP+ connector terminals.

Install SPSB Unit

Salvo Control Panel SCP+ Installation 3;4

Install SADL Door Lock

Salvo Control Panel SCP+ Installation 4;4

Connect Door Close Limit Interface

Auto Door Control Interface

Connect Dock Leveller Control Interface

Power Supply Input Connection

Salvo Control Panel SCP+ Wiring Diagram

Castell Salvo SCP+ Specifications

General

Category	Control Panel
Manufacturer	Castell
Type	Salvo SCP+
Input Voltage	24V DC
Power Consumption	5W
Operating Temperature	-20°C to +60°C
Housing Material	Polycarbonate
Protection Class	IP65
Weight	0.5 kg