SIDEWINDER MICRO 2 SPECIFICATIONS
Application
Guidelines
1:18th scale RC hobby vehicles weighing up to 2 lbs
Input Voltage
Range
Min: 2S LiPo, Max: 3S LiPo, 12.6V
BEC
Specifications
Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Product Use
Statement*
• Applying voltages higher than 12.6V will cause irreparable
damage to your controller, voiding the warranty.
• Recommended battery capacity for 1:18th scale vehicles
is 1500mAh or larger. We recommend using 30C continuous
discharge or higher LiPo batteries (or high quality 25C batteries
such as Traxxas® Power Cell).
• The Sidewinder Micro 2 has 3.5mm bullet connectors on the
motor wires and the battery input wires are bare. You must
add the connector of your choice to the battery leads. We
recommend a high current connector rated for at least 40 amps.
Contact
Castle Creations, Inc.
540 North Rogers Road
Olathe, KS 66062
(913) 390-6939 (ext. #1 Support, #3 Sales)
Product Support: support@castlecreations.com
Sales: sales@castlecreations.com
Website: www.castlecreations.com/sidewindermicro2
TRANSMITTER PROGRAMMING REFERENCE
AUDIBLE ALERT REFERENCE
• •
Start Fail
•
–
Voltage Cutoff
• •
–
Radio Glitch
•
–
•
Over-Temperature
–
•
Over-Current
•
–
–
Excessive Load
1.Brake/Reverse Type 3. Brake Amount 5. Motor Type
• Option 1: With Reverse* • Option 1: 25% • Option 1: Brushless*
• Option 2: Without Reverse • Option 2: 50%* • Option 2: Brushed Reversing
• Option 3: Crawler Reverse • Option 3: 75% • Option 3: Brushed High Power
• Option 4: 100%
2.Voltage Cutoff
• Option 1: Auto-Lipo* 4. Drag Brake
• Option 2: None • Option 1: Disabled*
• Option 2: 10%
• Option 3: 20%
• Option 4: 30%
• Option 5: Crawler Full On
*Default Setting
*Failure to adhere to the Product Use Statement constitutes a violation of the warranty agreement, and will
result in non-warranty service fees to repair or replace damaged products.
To Previous Page
Loading...