[Type here] [Type here] [Type here]
SAVE THESE INSTRUCTIONS
Work Area Safety
Keep work area clean and well lit. Cluttered
or dark areas invite accidents. Do not
operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical Safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
Do not expose power tools to rain or
wet conditions. Water entering a power tool
will increase the risk of electric shock.
Do not abuse the cord. Never use the
cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk
of electric shock.
Do not use AC only rated tools with a
DC power supply. While the tool may
appear to work, the electrical
components of the AC rated tool are
likely to fail and create a hazard to the
operator.
If operating the power tool in damp
locations is unavoidable a Ground
Fault Circuit Interrupter (GFCI) must
be used to supply the power to your
tool. GFCI and personal protection
devices like electrician’s rubber gloves
and footwear will further enhance your
personal safety.
To Next Page
Loading...