Swing Out Rear Door. Provides access
to major components and service points:
• Engine oil check and fill
• Vertically mounted engine oil filter
• Starter motor
• Alternator
S•O•S
SM
Oil Sampling Valve.
Allows easy sampling of the hydraulic
fluid for preventative maintenance.
Side-By-Side Radiator and Oil Cooler.
Simplifies cleaning and reduces
maintenance times with greater
accessibility.
Automatic Engine Idle. Automatically
lowers engine revs when not in use to
conserve fuel and lower environmental
noise/emissions.
Lifting Side Hood. Allows excellent
access to:
• Air filter
• Main implement valve
• Auxiliary change over valve
• Accumulator
• Fuel filter
• Hydraulic tank
500 Hour Oil and Filter Change Period.
Reduces operating costs and machine
down time.
Front Linkage. Protected front linkage
lines are routed above the boom and
stick to help reduce damage and
downtime.
End Dampening. End dampening on
both boom and stick cylinders reduces
shock loading, increasing component
life and improving soil retention when
loading at height.
Liner Bearings. Liner bearings in the
swing casting deliver longer component
life and reduced parts replacement costs.
6
Low Operating Costs
Good access to main check points and major components makes servicing and maintaining
the 304C CR easier.
To Next Page
Loading...