Versatility and Productivity. The Cat
C Series machine can be made even
more productive by ordering the angle
dozer blade configuration.
Strong and Durable. The Cat hydraulic
angle blade is engineered to be strong
and durable with a hardened steel wear
edge and good protection to cylinders
and hydraulic lines.
Angle Blade Positioning. The angle
blade can be positioned straight ahead
or angled up to 25 degrees to the left
or right reducing the number of times
required to back-up and reposition when
backfilling thus reducing operation time.
Single Control Lever. All dozer
functions are controlled from inside the
cab, with fully proportional fingertip
control to position the blade at any
angle, from the start to 25 degrees left or
right while travelling in either direction.
Full Pilot Control. Full pilot control
means no cables or linkages to wear,
keeping ”as new” controllability
throughout the machines life and
reducing maintenance costs.
Load Sensing Hydraulics, High Traction
Force and Auto 2-Speed Travel.
These features are standard on the
Cat C Series CR machines and ideally
suited for getting the best out of the
angling blade installation.
Excellent Blade Visibility. The compact
radius design of the Cat C Series
machines gives excellent visibility
to the blade in any position, allowing
the blade to be positioned behind the
operator and away from the front
linkage for better access when back
dragging and finishing in tight areas.
To Next Page
Loading...