Safety Section
i06544905
Safety Messages
SMCS Code: 1000; 7405
There may be several specific safety messages on
your engine. The exact location and a description of
the safety messages are reviewed in this section.
Become familiar with all safety messages.
Ensure that all the safety messages are legible.
Clean the safety messages or replace the safety
messages if the words cannot be read or if the
illustrations are not visible. Use a cloth, water, and
soap to clean the safety messages. Do not use
solvents, gasoline, or other harsh chemicals.
Solvents, gasoline, or harsh chemicals could loosen
the adhesive that secures the safety messages. The
safety messages that are loosened could drop off the
engine.
Replace any safety message that is damaged or
missing. If a safety message is attached to a part of
the engine that is replaced, install a new safety
message on the replacement part. Your Caterpillar
dealer can provide new safety messages.
Do not operate or work on this engine unless you
have read and understand the instructions and
warnings in the Operation and Maintenance Man-
ual. Failure to follow the instructions or heed the
warnings could result in injury or death. Contact
any Caterpillar dealer for replacement manuals.
Proper care is your responsibility.
Servicing the Engine and Reading
the Manual
Illustration 1 g00329090
Locations of the safety message for servicing the
engine and reading the manual
The safety message for servicing the engine and
reading the manual is located on the following
components: terminal box (1), customer connection
box (2) and circuit breaker box (3).
Illustration 2 g00308764
Do not operate or work on the engine unless the
instruction and warnings in the Operation and
Maintenance Manual are understood. Failure to
follow the instructions or failure to heed the warnings
could result in personal injury or death. Proper care is
your responsibility.
Coolant Pressure and Hot Surface
Illustration 3 g00309883
Location of the safety message for coolant pressure
and hot surface
The safety message for coolant pressure is located
near the top of the radiator.
SEBU7125-13
5
Safety Section
Safety Messages
To Next Page
Loading...