3737
KNOW YOUR LIFT TRUCK
NOTICE: It is not necessary to adjust the belt
length.
The belt is designed to fit any body
size.
Tug on it to confirm a tight fit.
1. Grip the plate (connector) of the belt and
pull the belt from the retractor. Then insert
the plate into the slot of the buckle until a
snap is heard.
2. Make sure the belt is not twisted.
3. Be sure to fasten the belt as low as possible
across your hips, not across your abdomen.
Push the button in the buckle to release the belt.
The belt will automatically retract when
released. Hold the plate of the belt and allow
the belt to slowly retract.
100981
100982A
100983
If you fasten the belt across your
abdomen, the belt will dig into your
abdomen in an accident and could cause
serious internal injuries.
To Fasten
To Release
Buckle
Plate
WARNING
!
To Next Page
Loading...