7070
OPERATING TECHNIQUES
Handle ONLY stable loads. A load having
unstable items can easily shift and fall on
someone. DO NOT handle a load if any part of
it is likely to fall, or if the pallet or skid is dam-
aged. Neatly stack and band loose or unstable
loads.
Handle ONLY loads within the capacity of
your lift truck as shown on the capacity chart.
If the combined center of gravity of the truck
and load is located forward of the front axle, or
if the load exceeds the capacity, the truck can
tipover forward.
Set the forks as far apart as possible for maxi-
mum support of the load.
◆◆
Handling Loads Safely
101075
100761
20 %
60 %
20 %
103446
Not every load can be handled using only the
forks. Some loads will require a special attach-
ment.
100856
WARNING
!
WARNING
!
WARNING
!
To Next Page
Loading...