CAT Forklift - Page 86

7979
||||||||||||||||||||||||||||||||||||||||||||||||| TRANSPORTATION HINTS ||||||||||||||||||||||||||||||||||||||||||||||
Always block the trailer or rail car wheels
before loading the lift truck.
Position the lift truck on the truck bed or rail
car.
Place the direction lever in NEUTRAL, the
lock knob in lock position and apply the park-
ing brake.
Turn the key switch to the (OFF) position
and remove the key.
Block the wheels and secure the lift truck with
tiedowns.
Do not steer the truck after it has been secured
on the truck or rail car.
NOTICE: Improper lifting or tiedowns may
cause a load to shift and cause
injury and/or damage.
1. Weight and instructions given herein apply
to lift trucks manufactured by Mitsubishi
Caterpillar Forklift America Inc.
2. Use proper rated cables and slings for lift-
ing. Position the crane so the lift truck is
level when lifted.
3. Spreader bar widths should be sufficient to
prevent contact with the lift truck.
4. Use the tiedown locations provided for lift
truck tiedown.
Check the state and local laws governing
weight, width and length of a load.
Contact your Cat lift truck dealer for shipping
instructions for your lift truck.
◆◆
Lift Truck Shipping
◆◆
Machine Lifting and Tiedown
Information
Check travel route for overpass clear-
ances. Make sure there is adequate
clearance if the vehicle being trans-
ported is equipped with a high mast or
cab.
Remove ice, snow or other slippery
material from the shipping vehicle and
loading dock.
101624
WARNING
!