EasyManua.ls Logo

Cata ALPHA6 - User Manual

Cata ALPHA6
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AGB_ALPHA6/7/9BK/WHK v1b
GB IE
ALPHA6/ 7/ 9/BK/ WHK
AGB60/70/90

Questions and Answers

  • X
    xpriceAug 12, 2025
    Why is the suction performance reduced on my Cata ALPHA6?
    • L
      Lisa DavisAug 12, 2025
      Reduced suction performance on your Cata Ventilation Hood can be caused by several factors. The speed setting may be too low, so try selecting a higher speed. The distance between the hood and the hob might be too great; readjust it to 750mm for gas hobs or 650mm for electric hobs. A dirty aluminum grease filter can also cause this, so clean the filters. If you have models CLVH60SS-C & CLVH60W-C, the top vent might be obstructed, so clear any obstruction. Finally, if you're using an optional vent kit, ensure it's fitted according to the manufacturer's instructions.
  • M
    Mary WalkerAug 19, 2025
    Why do cooking smells linger even when my Cata Ventilation Hood works normally?
    • M
      Megan RojasAug 19, 2025
      If cooking smells linger even when your Cata Ventilation Hood is working, it might be because a charcoal filter isn't fitted in recirculation mode, or the charcoal filter is full of grease. To resolve this, fit a charcoal filter if you are recirculating air, or change the filter.
  • P
    Pamela EvansAug 27, 2025
    What to do if my Cata Ventilation Hood is excessively vibrating?
    • R
      rhuertaAug 27, 2025
      Excessive vibration in your Cata Ventilation Hood may occur if the appliance isn't properly hung on the brackets; in this case, take down the appliance and check it is properly fixed. Another cause can be a damaged fan blade. If the fan blade is damaged, switch off the appliance. Repair should be carried out by qualified service personnel only.
  • S
    Shawn PayneSep 3, 2025
    What to do if both the light and motor do not work on my Cata Ventilation Hood?
    • J
      Jesse WardSep 3, 2025
      If neither the light nor the motor are working on your Cata Ventilation Hood, first, replace the light bulb with one of the correct rating, as the current one may be blown. Then, check the power supply to ensure the power connection isn't loose.

Cata ALPHA6 Specifications

General IconGeneral
TypeWall-mounted
Housing materialStainless steel
Control TypePush button
Number of speeds3
Lighting TypeLED
Number of bulbs2
Grease filter typeAluminum
Width60 cm
Noise level63 dB
Number of motors1
LightingYes
Filter typeAluminum

Related product manuals