Need help?Do you have a question about the Cata E-120 GT TIMER and is the answer not in the manual?
Ensure power is off, installation by qualified person, and read instructions carefully.
Avoid areas with oil, grease, corrosive liquids, extreme temperatures, or weather.
Steps include making holes, running cables, and attaching casing as per diagrams.
Connect power supply, verify voltage/frequency, use fixed wiring, no earthing needed (Class II).
Overview of STANDARD, TIMER, TIMER-HYGRO, E 100 GST, E 100 GTL versions.
Set the timer function for the extractor fan from 3 to 15 minutes.
Adjust timer and humidity levels (40-95%) for automatic fan operation.
How the presence sensor activates the fan and its timer.
Adjusting LED brightness and fan operation with light switch.
Ensure power is off, use damp cloth, clean propeller and casing for performance.
Regular inspection of motor and components; use original spare parts.
Two-year guarantee, requirements for repair/replacement, and limitations.
General| Power | 15W |
|---|---|
| Voltage | 230V |
| Frequency | 50Hz |
| Timer | Yes |
| Diameter | 120 mm |
| Weight | 0.6 kg |
| Type | Axial |
| Mounting | Ceiling/Wall |
To Next Page
