EasyManua.ls Logo

Cata EOSV2 - Page 18

Cata EOSV2
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
In more detail...
GB IE
Removing the door from the oven (Fig.1)
> To simplify cleaning the interior of the oven, the door can be removed.
The process of removing the door is shown below:
> Open the door fully to position “C”
Lift the two mobile links "A" of the hinges, until xing at point “B”.
> Then close the door to the half-way position.
> Next, lift the door upwards and remove it, sliding it outwards; hold the
door by the sides close to the hinges when doing this.
> To replace the door, rst slide the hinges into their grooves and open the
door completely.
> Remember to turn the two moving links "B" used to engage the two
hinges before closing the door (Fig.1).
WARNING
• Take care not to remove the hinge locking system when taking off the
door, as the hinge mechanism can spring back suddenly.
• Never submerge the door in water for any reason.
Care and maintenance
A
B
C
FIG. 1

Related product manuals