Do you have a question about the Catalina Capri 22 and is the answer not in the manual?
Draft (Standard Keel) | 3.5 ft |
---|---|
Berths | 4 |
Length Overall | 21.5 ft |
Draft (Shoal) | 2.83 ft (0.86 m) |
Draft (Deep) | 4.5 ft (1.37 m) |
Draft (board down) | 4.5 ft (1.37 m) |
Displacement | 2, 490 lbs |
Engine | Outboard |
Fuel Capacity | 6 US gal (23 L) |
Key physical measurements of the Capri 22 sailboat, including length, beam, and draft.
Details on standard and tall rig dimensions, including I, J, P, and E measurements.
Illustrations and dimensions for both the standard and tall rig sail plans.
Essential checks before launching the sailboat, covering hull, deck, and rigging.
Final checks for safe and efficient sailing, including tiller, sails, and equipment operation.
Procedure for raising the mast and adjusting standing rigging for optimal performance.
Instructions for attaching and setting the mainsail and jib sails.
Guidance on properly hoisting and setting sails for optimal performance.
Techniques for safely docking the boat in different wind and tide conditions.
Explanation of different sailing directions relative to the wind.
Instructions for maintaining the 12-volt marine battery, including electrolyte levels.
Overview of the DC electrical panel switches and their functions.
Guidance on using the galley unit, including stove safety and basin use.
Layout of the boat's interior, showing berths, storage, and galley.
Guidance on selecting an appropriate outboard engine for the Capri 22.
Safety precautions and procedures for trailering and launching the sailboat.
Steps for preparing the boat for winter storage to prevent damage.
Additional recommendations for storing the yacht during prolonged winter months.
Checks for pre-use, monthly, and seasonal maintenance of rigging and hull.
Procedures for cleaning, buffing, and repairing fiberglass surfaces.
Care instructions for spars, rigging, and sails to ensure longevity.
Essential safety advice for operating the sailboat in various conditions.
List of mandatory safety gear, including fire extinguishers and life vests.
Guidelines for anchoring procedures and selecting appropriate equipment.
Standards and recommendations for designing and installing lightning protection.
Details on external ground plates, strips, and connections for lightning systems.