Need help?Do you have a question about the CataO CTRS-80 REV SLIM and is the answer not in the manual?
Automatic addition of cold water and automatic heating.
Multiple safety devices for protection against dry heating, overheating, and high pressure.
Steps for mounting the water heater on a solid wall, including hole placement and securing.
Requirements for the electrical socket, including voltage, current, and height.
Details on using control buttons, temperature adjustment, and indicator lights.
Safety guidelines for the earthed socket, rating, dryness, and inspection.
The wall must support double the heater's weight without distortion or cracks.
Heater must be fully filled before first use; air must be released via outlet valves.
Normal drops from release hole; never block it to avoid damage or accidents.
Avoid exposing people to hot water initially; adjust to a safe temperature to prevent scalding.
General| Voltage | 220-240V |
|---|---|
| Frequency | 50/60Hz |
| Protection | IPX4 |
| Cable Length | 1.5m |
| Material | Plastic |
To Next Page
