Cater-Wash CK8514 User Manual

Cater-Wash CK8514 Trouble Shoot
Fault Error Codes Action Still not fixed.
Run
test
Washing machine
stuck on pause
22, 23
Filling problems. - Make sure the
customers water pressure is above
0.5 bar. Make sure there is no
obstructions inside inlet hose. Make
sure Solonoid is not leaking.
Replace solonoid.
T06,
T09
Washing machine
stuck on pause or not
spinning.
31
Draining problems. Make sure the
customers filter is empty. Unscrew
the filter on the bottom right of the
washing machine with a tray
underneath and check not clocked.
Check the drain hose is clear. Check
the electrical connections to the drain
pump.
Replace drain pump
CKP0226
T05
Washing machine
stuck on pause.
Detergent not entering
washing machine.
38, 39
Dispenser problems. Check for
obstructions in the despenser. Check
electical connection of the water
valves.
Replace the dispenser
motor.
Please always maker sure you have removed the travel bolts.
To find error codes
1. Turn the washing machine on.
2. Press ‘temp’ then ‘ewash’ then ‘temp’ then ‘ewash’ - Door will lock
3. Wait 10 seconds
4. T01 will display on the screen
5. Turn dial to T02 and press start . Any error codes will show on the screen now.

Cater-Wash CK8514 Specifications

General

Brand	Cater-Wash
Model	CK8514
Category	Washer
Language	English

Summary

Finding Error Codes

Error Code Identification Procedure

Steps to turn on the machine and navigate menus to display error codes on the screen.

Troubleshooting Washing Machine Faults

Washing Machine Stuck on Pause

Addresses filling problems, checking water pressure, inlet hose obstructions, and solenoid leaks.

Washing Machine Stuck on Pause or Not Spinning

Focuses on draining issues, checking the filter, drain hose, and electrical connections to the drain pump.

Detergent Not Entering Washing Machine

Troubleshoots dispenser problems, checks for obstructions, and verifies electrical connections to water valves.

Washing Machine Won't Go Into Cycle

Covers motor issues, ensuring shipping bolts are removed, checking drum obstructions, bearings, and connections.

Washing Machine Won't Go Into Cycle - Electrical

Involves checking outlet voltage and electrical connections at the drum motor and drive motor.

Washing Machine Won't Go Into Cycle - Control Board

Addresses main control PCB issues and internal problems requiring unit restart or replacement.

Door Won't Unlock

Deals with door lock assembly problems, wiring integrity, and microswitch operation.

Stuck on Pause, Door Won't Unlock, Won't Drain

Addresses water temperature issues, checking wiring, thermistor resistance, and heating element.

Won't Start Cycle or Stuck on Pause

Deals with system contact failure, checking wiring integrity, connections, insulation, and short circuits.

Tripping Electric

Ensures proper plug connection, checks customer electrics, and guards against water dripping onto electrical components.

Washing Machine Banging Metal on Metal

Checks drum mobility, back panel damage, and suspension spring attachment.

Washing Machine Moving Around

Ensures travel bolts are removed, suspension springs are in place, and the machine is level.

Buttons Get Stuck In

Actionable advice to replace the buttons.

No Power to Washing Machine

Checks power connections, fuses, and ensures the machine is not plugged into extensions.

Buttons Aren't Working

Checks for child lock activation and control locking.