EasyManua.ls Logo

Cater-Wash Jolly Series User Manual

Cater-Wash Jolly Series
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
- 1 -
Question and Answer IconNeed help?

Do you have a question about the Cater-Wash Jolly Series and is the answer not in the manual?

Cater-Wash Jolly Series Specifications

General IconGeneral
BrandCater-Wash
ModelJolly Series
CategoryDishwasher
LanguageEnglish

Summary

Installer Instruction Manual

Installation Procedures

Installation must be performed by authorized personnel per laws and instructions.

General Information and Safety

Safety Precautions

Read instructions carefully; improper use can cause damage to people or property.

Electrical Safety Guidelines

Electrical safety is ensured by correct earth connection; check system if in doubt.

Installation and Start Up Process

Water Inlet Connection

Connect inlet hose to solenoid valve nipple with gasket seal.

Water Supply and Drain Connection

Water Quality and Hardness Impact

Use pure water; hard water invalidates warranty, use demineralised or softened water.

Drain Connection and Trap

Connect drain discharge pipe with clamps, ensure no kinks, use a trap.

Electrical Connection Procedures

Qualified Electrician Requirement

Electrical connection must be undertaken by licensed and qualified electricians.

Power Supply Verification

Verify wiring network design, grounding, and isolating switch for voltage category III.

Earth and Equipotential Connection

Ensure efficient earth connection and include equipment in an equipotential system.

Control Panel Overview

Control Panel Functions

Machine Operation Guide

Initial Operation Protocol

Initial operation must be performed by authorized and qualified personnel.

Chemical Dosing Adjustment

Rinse Aid Dosing (Peristaltic Pump)

Detergent Dosing (Peristaltic Pump)

Troubleshooting Common Issues

Poor Washing Results

Inspect filter basket, wash arms, detergent level, and wash cycle length.

Advanced Troubleshooting

Indicator Light Status Table

Fault Cause Diagnosis

Fault Diagnosis via Indicator Lights

Diagnosing faults based on the status and cause indicated by lights.