To Next PageTo Next PageWhat to do if my CATVISION CSR-401HP Set-top boxes remote control unit (RCU) is not working?
If your CATVISION Set-top box remote control is not working, first replace the batteries. If that doesn't solve the issue, make sure you are pointing the remote directly at the Set-top box.
Why is there no audio from my CATVISION CSR-401HP?
If you're getting no audio from your CATVISION Set-top box, ensure that neither the Set-top box nor the TV is in mute mode. Also, check the RCA cable to make sure it's securely connected.
What to do if I have only audio but no video on TV Screen with CATVISION CSR-401HP?
If you are only getting audio but no video on your TV screen when using CATVISION Set-top box, check that the RCA cable is properly connected without any loose connections. Also, ensure the Set-top box is set to TV mode, not radio mode.
Why does my CATVISION CSR-401HP show no signal?
If your CATVISION Set-top box shows no signal, ensure the RF cable is properly connected. Also, verify all the Set-top box setting parameters.
General| Brand | CATVISION |
|---|---|
| Model | CSR-401HP |
| Category | Set-top boxes |
| Language | English |
Covers warnings related to water, fire hazards, and handling sensitive electronic components.
Addresses common issues like no power, no video, no signal, and no audio.
Guidance on setting up the satellite list, including adding and editing.
Step-by-step process for adding new satellites and editing existing entries.
Configuration of LNB frequency, DiSEqC, and signal strength parameters.
Settings for scan type, FTA only, scan channel, and scan mode.
Instructions on how to initiate and perform a blind scan for channels.
How to switch to the TP list and edit transponder frequencies.
Steps for adding TPs and performing a search based on transponder data.
Describes Fav, Lock, Skip, Move, and Edit actions for TV and Radio channels.
A step-by-step guide on how to record programs while they are playing.
