Need help?Do you have a question about the CAV A8M and is the answer not in the manual?
Configures the speaker system setup for large and small speakers.
Adjusts the volume levels for individual channels in 5.1CH/6.1CH modes.
Enables and adjusts the super-bass function for front channels.
Configures the delay time for center, surround center, and surround channels.
Details connecting external components with line out to the amplifier.
Explains the built-in test function for checking speaker connections.
Instructions for powering the amplifier on and off.
Describes automatic power-on and playing based on digital input signals.
How to select input sources like AUX1, AUX2, AUX3, and DVD-AUDIO.
How to increase or decrease the main volume using the front panel knob.
How to adjust the bass and treble levels using the front panel knobs.
General| Power Output | 150W (8 ohms, 1kHz, 0.1% THD) |
|---|---|
| Total Harmonic Distortion | ≤0.05% (1kHz, 1W) |
| Signal-to-Noise Ratio | ≥95dB (A-weighted) |
| Input Sensitivity | 200mV |
| Input Impedance | 47k ohms |
| Output Impedance | 4-8 ohms |
To Next Page